Single Layer Carbon Fiber Twill Weave Veneer, .009" Thick
Use this real carbon fiber veneer for making thin parts or inlay. Its manufactured using the same high quality materials and methods as our carbon fiber plate. Single Layer veneers are much more flexible than dual layer veneers. Single layer veneers are capable of bending up to a .5 inch radius! This veneer has a beautiful high gloss surface on one side, and a matte finish on the other side for bonding.
Made in San Diego CA.
Total Panel Thickness: .009" ±.003"
Length and Width Tolerance: ±.125"
Panel Density: .052lb/in3
Carbon Fiber Specifications:
Tensile Strength: 640ksi
Elastic Modulus: 33.5Msi
Tensile Strength: 45,000 psi
Tensile Elongation: 2.0%
Tensile Modulus: 3,000,000 psi
Flexural Strength: 45,000 psi
Flexural Modulus: 2,200,000 psi
Compressive Strength: 8,400 psi
Compressive Modulus: 160,000 psi
Impact Strength 3.75 (in-lbf/in)
Heat Deflection Temperature: 161°F